Hydraulic Expansion Presses For Metal Forming(YB98)
Characteristics
Function
·Auto. count
·The main seal is made of imported material
·Schneider button device
·PLC control
·Main circuit with no-voltage, overload and open-phase protections
·The main hydraulic components using Taiwan products
·Piston rods are IF heat treated with electroplated hard chromium coat
·Infrared photoelectric reflection sensor safe and reliable protection
Contact
Mobile: 86 15828551539
Product Applications
Water Swelling Hydraulic Press is mainly applied to the plastic material forming parts with miscellaneous surface, high linear flow. It is specially exploited, designed and manufactured to achieve this advanced technology.
Characteristics
·Water Swelling Hydraulic Press is one kind of Four-Column Fast Hydraulic Press, which consists of the fuselage, the main cylinder, the propulsion cylinder, the high-pressure water tank, the hydraulic and the electrical control part.
·It is equipped with two kinds of speed, no-load running fast and slow running by mold .
·High efficiency, low energy consumption, easy operation, stable work, safety and so on.
·Auto. count
·The main seal is made of imported material
·Schneider button device
·PLC control
·Main circuit with no-voltage, overload and open-phase protections
·The main hydraulic components using Taiwan products
·Piston rods are IF heat treated with electroplated hard chromium coat
·Infrared photoelectric reflection sensor safe and reliable protection
Model
No. | Item | Unit | Parameters | |||
YB98-150 | YB98-200 | YB98-300 | YA98-350 | |||
1 | Normal Force of Master Cylinder | KN | 750 | 1000 | 2000 | 2500 |
2 | Return Force of Master Cylinder | KN | 35 | 40 | 50 | 150 |
3 | Maximum Stroke of Master Cylinder | mm | 560 | 560 | 560 | 600 |
4 | Maximum Working Pressure of Master Cylinder Liquid | Mpa | 20 | 20 | 25 | 17 |
5 | Normal Force of Propulsion Cylinder | KN | 750 | 1000 | 1000 | 1000 |
6 | Return Force of Propulsion Cylinder | KN | 100 | 160 | 160 | 200 |
7 | Maximum Stroke of Propulsion Cylinder | mm | 360 | 350 | 350 | 250 |
8 | Maximum Working Pressure of Propulsion Cylinder Liquid | Mpa | 20 | 20 | 20 | 20 |
9 | Maximum Storage Capacity of Water Cylinder | L | 6 | 6 | 4 | 1.6 |
10 | Maximum Working Pressure of Water Cylinder Liquid | Mpa | 40 | 55/80 | 80 | 150 |
11 | Table Distance from Moved Cross Beam to Squeeze Water Mold Sub-plate Max./Min. | mm/s | 960 400 |
960 400 |
960 400 |
920 320 |
12 | Down Speed of Moved Cross Beam | mm/s | 300 | 300 | 130 | 110 |
13 | Feeding Speed of Moved Cross Beam | mm/s | 35 | 25 | 20 | 18 |
14 | Opening Speed of Moved Cross Beam | mm/s | 300 | 250 | 280 | 180 |
15 | Active Area of Squeeze Water Mold Sub-plate | mm | 530x420 | 600x480 | 650x600 | 360x360 |
16 | Height from Squeeze Water Mold Sub-plate to Ground | mm | 885 | 745 | 845 | 1560 |
17 | Water Pump Flux | L/min | 72 | 72 | 72 | 72 |
18 | Main Oil Pump Flux | L/min | 90 | 90 | 90 | 180 |
Water Pump Motor Power | kw | 3 | 3 | 3 | 3 | |
Main Oil Pump Motor Power | kw | 11 | 15 | 18.5 | 30 | |
Active Area of Workbench(left-rightxfront-back) | mm | 575x550 | 700x700 | 700x880 | 800x990 | |
Boundary Dimension(left-rightxfront-backxheight | mm | 1770x1700x3880 | 2050x1700x4280 | 2100x1930x3530 | 2200x2000x4000 | |
19 | Machine Weight (approximately) | t | 5 | 6.3 | 7.5 | 11 |
Contact
Mobile: 86 15828551539